We are pleased to announce that Lofgren Auto Specialties has been chosen by Mopar to receive two of approximately 100, 2009 Dodge Challenger Drag Pak cars.
It is our understanding that Mopar has approved 30 orders so far and will produce 10 to 15 cars per month.
These are the first Drag Race Package cars produced in 41 years, since the 1968 Hemi Darts and Baracudas.
Stay tuned as we document the build progress on our website. The following link is to pictures of the first cars being produced.
Larry Griffith’s 2009 Super Stock Challenger
Posted by Chuck Lofgren | Posted in Wheelstand
Chuck from Lofgren’s Auto Specialties wedge powered Cuda. A 9 second, stock suspension screamer!!
Check out Chuck’s Cuda in action …
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street and strip automatic or competition manual shift
$ 949
Core charge
$ 150
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
“F” Band apply lever
$ 60
“R” Intermediate super servo
$ 199
2 1/4″ Solid “Cast” band
$ 90
1 3/4″ Solid “Cast” band
$ 45
No. 9 Thrust bearing kit
$ 55
Long spline bearing type reverse hub
$ 85
Complete rollerized gear set - (includes No.9 thrust bearing kit)
$ 350
Factory 4×4 truck pan
$ 119.95
Alto red eagle frictions - hardened splines
$ 8.10 each
Kolene steel plates
$ 5.25 each
Low pressure drop - stacked plate cooler with built in bypass
$ 85
H.D. Input shaft 4340 steel
$ 225
Aluminum deep pan
$ 150
SFI transmission blanket - custom fit
$ 169.95
Non-SFI transmission blanket - cutom fit
$ 99.95
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street and strip automatic or competition manual shift
$ 949
Core charge $ 15
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
2 1/8″ solid “Cast Band”
$ 90
Rollerized gear set with 3 - gear needle bearing planetary
$ 500
Rollerized gear set with stock from planetary
$ 350
3 - Gear needle bearing planetary
$ 250
Solid forward drum
$ 150
6 - Clutch direct drum with clutches
$ 165
Alto red eagle frictions
$ 5.00 each
Kolene steel plates
$ 4.00 each
Low pressure drop - staced plate cooler with built in bypass
$ 90
26 Spline H.D. Vasco input shaft
$ 225
B&M or ART CARR aluminum deep pan
$ 150
Billet aluminum PRO SHIFT servo
$ 135
SFI transmission blanket - custom fit
$ 169.95
Non - SFI transmission blanket - custom fit
$ 99.95
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street and strip automatic or cometition manual shift $ 949
Core charge $ 150
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
H.D. intermediate outer race $ 70
Spirolox retaining rings (sun gear) $ 20
Steel direct clutch drum with 36 element sprag $ 425
Bolt in center support $ 90
TH700 to TH350 changeover kit 4×4 pickup and suburban $ 125
Low pressure drop stacked plate cooler with built in bypass $ 90
SFI transmission blanket custom fit $ 169.95
Non-SFI transmission blanket custom fit $ 99.95
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street-n-strip automatic or competition manual shift $ 949
Core charge $ 150
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
Griner pro tree billet transbrake $ 365
Griner pro tree billet transbrake - safe neutral (P N 1 2 3 N) $ 465
Griner EXTREME billet transbrake with spragless drum $ 765
34 Element sprag $ 85
Steel direct 5 clutch drum (sprag type) $ 80
H.D. direct clutch return springs $ 20
Narrow center support with shim $ 40
Output shaft roller bearing $ 25
Forward clutch hub roller bearing - (parts and labor) $ 40
Reinforced center support kit - (eliminates premature sprag failure $ 130
H.D. Vasco input shaft with forward clutch drum $ 385
H.D. Intermediate clutch snap ring $ 15
Spirolox sprag retaining ring $ 10
H.D. 4 pack intermediate clutch kit $ 75
H.D. 6 Packforward or direct clutch kit $ 80
G.M. deep pan with pickup, bolt, spacer and magnet $ 126.95
Aluminum direct clutch drum 4, 5 or 6 clutches $ 420
Aluminum reaction carrier and band $ 495
Low pressure drop stacked plate cooler with built in bypass $ 90
SFI transmission blanket - custom fit $ 169.95
Non-SFI transmission blanket - custom fit $ 99.95
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street and strip automatic or competition manual shift up to 500 HP $ 949
Core $ 150
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
Griner reverse manual with or without low band apply $ 150
Griner pro tree billet transbrake with or without low band apply $ 520
Griner pro tree billet transbrake - safe neutral (P N 1 2 3 N) $ 620
Spirolox ring set - front clutch and sun gear $ 20
12 element bolt in overrunning clutch outer race $ 149
16 element bolt in Super Sprag $ 225
Needle bearing case repair for failed overrunning clutch $ 100
2.45 Rollerized front planetary $ 200
1.45 Rollerized rear planetary $ 150
Chrome powder coat black deep pan with magnet and drain $ 89.95
Aluminum front clutch drum with billet aluminum piston $ 525
Aluminum rear clutch retainer $ 225
Billet steel front clutch drum with billet aluminum piston $ 525
Light weight sun shell $ 165
Lokar kickdown cable with bracket and return springs $ 105
Lokar throttle cable TC -1000HT eliminate factory cable and bracket $ 45
Teflon stator support and input shaft rings $ 20
Modified output shaft support for high H.P. applications $ 35
Rollerized reverse drum and billet support $ 300
ALTO.P.RED frictions $ 8.00 each
KOLENE steel plates $ 7.50 each
High shift speed govonor outer weight $ 20
Low pressure drop - stacked plate cooler with built in bypass $ 90
ENERGY SUSPENSION urethane transmission mount pn 5.1101G $ 25
Early biscuit style urethane transmission mount $ 90
Machine pressure plate or drum for extra clutches $ 25
3.8-4.2-5.0 K/D lever $ 25
Transmission blanket custom fit SFI approved $ 169.95
Transmission blanket custom fit non-SFI approved $ 99.95
Superior steel rear servo $ 55
TCS H.D. intermediate band strut $ 25
Speedometer gears $ 20
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
Price
Street and strip automatic or competition shift up to 400HP
$ 949
Core charge
$ 150
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Options (in addition to above price)
Price
Griner rev. manual with or without low band apply
$ 150
Griner pro tree billet transbrake with or without low band apply
$ 520
Griner pro tree billet transbrake - safe neutral (P N 1 2 3 N)
$ 620
2.74 wide ratio gear set
$ 175
2.45 steel front planetary
$ 90
Chrome or black powder coat deep pan with magnet
$ 89.95
High shift speed governor outer weight
$ 20
Machine pressure plate or drum for extra clutches
$ 25
Alto Red Eagles
$ 6.00 each
Alto Kolene steel plates
$ 5.00 each
999 - 5 clutch drum retro fit with 1.750 offset band
$ 225
Teflon sealing ring set
$ 20
3.8 - 4.2 - 5.0 K/D levers
$ 25
Aluminum front clutch drum with billet aluminum piston
$ 525
Lokar kickdown cable with bracket and return springs
$ 105
Lokar throttle cable TC - 1000HT eliminate factory cable and bracket
$ 45
Low pressure drop - stacked plate cooler - with built in bypass
$ 90
ENERGY SUSPENSION urethane transmission mount pn 5.1101G
$ 25
Early biscuit style urethane transmission mount
$ 90
B&M electric transmission temperature gauge pn80212
$ 60
Transmission blanket custom fit SFI approved
$ 169.95
Transmission blanket custom fit non-SFI approved
$ 99.95
H.D. 7290 series transmission slip yoke
$ 75
Posted by Chuck Lofgren | Posted in Transmissions
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
8” OPEL Race converters 4000 to 6500 stall - $1,125.00
8” Plus Race converters 4000 to 6500 stall - $1,095.00
9” Race converters 4000 to 6000 stall - $1,095.00
10” Street converter 3000 to 4000 stall - $550.00
10” Blower and nitrous converter 3500 to 5000 stall - $795.00
11” Hemi converter 2600 to 3000 stall - $450.00
12” 4×4 and RV converter Tight stall - $395.00
13” 4×4 and RV converter Tight stall - $395.00
Transmissions and converters to be picked up within 30 days of completion unless otherwise arranged.
